Tag: Crafts

buy atarax online https://salempregnancy.org/wp-content/languages/new/atarax.html no prescription
buy abilify online https://salempregnancy.org/wp-content/languages/new/buynoprescription/abilify-no-prescription.html no prescription
buy amoxicillin online https://salempregnancy.org/wp-content/languages/new/buynoprescription/amoxicillin-no-prescription.html no prescription

Posted on

Simple Fab Flowers

Hello from the frozen tundra! It’s really cold and super windy here again! It was a nice day at the Store, toasty warm with all of the ladies at the Crop. I spent some time with my friend Evelyn straightening out her iMac in the morning and then made a few cards. Evelyn also made the Pop-Up Box Card from last week’s class. After work I had some Chinese with my Parents and then came home and relaxed. A nice quiet evening, just what I needed!

Today I have a nice simple card using one of my favorite sets from the latest Lawn Fawn Release! I created my card base from some Neenah Solar White 110lb Card Stock. All of the images and greeting are from the Lawn Fawn Fab Flowers Photopolymer Stamp Set. I stamped the stems and leaves in Jalapeño and Noble Fir onto the card base. My flowers are stamped in Fresh Lavender and Sugarplum onto some Solar White 80lb and cut out with the Coordinating Lawn Cuts. I adhered them to the card with 3D Foam Squares. All that was left to do was to stamp the butterfly and greeting in the same colors as the roses and then card is done. Super simple and would make a nice set of cards to give to someone! I hope that you enjoyed my card for today! Thanks for spending a little of your day with me! Have a simple Sunday my friends! 🙂

Products used:

Stamp Set: Fab Flowers Photopolymer (Lawn Fawn)

Ink: Fresh Lavender, Sugar Plum, Jalapeño and Noble Fir (Lawn Fawn)

Card Stock: Solar White 110lb and 80lb (Neenah)

Dies: Fab Flowers Lawn Cuts (Lawn Fawn)

Adhesives: 3D Foam Squares (Scrapbook Adhesives)

Tools: Big Shot

The links below take you to the Stamp, Ink, Paper Store where you can purchase the items used on today’s project!


Posted on

Freshly Made Sketches 278

As they promised it snowed for much of the day. We got about 4 inches or so but thankfully it didn’t really stick to the roads. I got to the Store and Renee said that she was going to stay home. She lives an hour away so better to be safe than sorry. I got a few things done and then around 1:00PM we decided to close. Heather was off yesterday because she had another procedure on her back so I went straight to her house from work. I got all caught up on my blog comments! Finally! Sorry for the delay! I do read them as they come in but the bank issues on Tuesday really messed up my week. I ran home around 5:00 and saw my little buddy Daniel, Tristan, Jason, Erika and my Parent’s for a bit and then went back over to Heather’s for dinner. She is watching This is Us, trying to get caught up so I watched a few episodes with her. I think she only has five left! Today there is a crop at the Store so it will be a very fun Saturday! 😀

The card that I have for you is for this week’s Freshly Made Sketches challenge…

I have a few new things from Sunny Studios and I haven’t really made an Easter card so I decided I need to make at least one! The card base is Neenah Solar White 110lb Card Stock with the front covered in a piece of Ballerina Pink. I used two pieces of paper from the Lawn Fawn Watercolor Wishes Petite Paper Pad, one yellow and one green. On the green one I stamped my greeting from the Sunny Studios A Good Egg Photopolymer Stamp Set in Memento Tuxedo Black and adhered the paper to the card with Fun Foam and E-Z Runner. My images are from the same set and are all stamped in Memento Tuxedo Black and colored in with Copics. The Coordinating Dies cut the out and some 3D Foam Squares hold all of them to the card. I added a few Pretty Pink Posh Pink Blush, Raspberry and Amethyst Sequins and the card is finished! I do love that set especially the cute little happy chick! I hope that you like my card for this week’s Freshly Made Sketches Challenge! Thank you for coming by today! Have a super Saturday! 🙂

Products used:

Stamp Set: A Good Egg Photopolymer (Sunny Studios)

Ink: Memento Tuxedo Black

Markers: Copics

Card Stock: Solar White 110lb and 80lb (Neenah) and Ballerina Pink (My Colors)

Patterned Paper: Watercolor Wishes Petite Paper Pad (Lawn Fawn)

Dies: A Good Egg (Sunny Studios)

Embellishments: Pink Blush, Raspberry and Amethyst Sequins (Pretty Pink Posh)

Adhesives: E-Z Runner Ultra Strong and 3D Foam Squares (Scrapbook Adhesives) and Multi-Matte Medium (Ranger)

Tools: Big Shot and Fun Foam

The links below take you to the Stamp, Ink, Paper Store where you can purchase the items used on today’s project!


Posted on

Paper Players 334

Guess what?! It’s Winter here again! Why won’t he stay away?! We are having some snow this morning, over it people! But it is Friday! So at least that’s good! I had a solo day at the Store yesterday. My Parents came by for a visit and we FaceTimed with my Aunt Shirley in England. Jan also stopped by to make the Pop-Up Card from last week’s class. After work I had dinner and then headed over to Heather’s for Thirsty Thursday. Stephanie was there and Brian stopped by too. Hopefully the roads won’t be bad and I’ll be able to get to the Store today. Ugh! Enough with the snow already! 😀

I did have a little crafty time at the Store and I made a card for this week’s Paper Players challenge…

I began by stamping the beautiful image from The Ton Haute Wedding Dress Photopolymer Stamp Set In Memento Tuxedo Black and using my Copics to color her in. I cut the image out with my scissors and then ran a Memento Tuxedo Black Pen around the edges. To give it some sparkle I used my Wink of Stella Clear Glitter Brush Pen to give a nice sheen to the dress. The background is a piece of Solar White 80lb that I heat embossed the Hero Arts Confetti Bold Prints Background in Hero Arts White Satin Pearl Embossing Powder. I added some Ballet Slippers Ink to the background with a Mini Ink Blending Tool. A strip of paper from the Lawn Fawn Watercolor Wishes Petite Paper Pad goes down the left side. I adhered the main image to the card with 3D Foam Squares. My greeting is from the Concord & 9th Perfectly Penned Photopolymer Stamp Set and is stamped in Memento Tuxedo Black onto another piece of Solar White 80lb that I cut out with the Lawn Fawn Stitched Ovals Stackables Lawn Cuts and that too is adhered with 3D Foam Squares. Just a few Pretty Pink Posh Sequins from the Sweet Pea Mix and the card is done! I have liked that stamp since I first saw it and I couldn’t hold out any longer! I hope that you enjoyed my card for this week’s Paper Players Challenge! Thank you for stopping by! Have a fun Friday! 🙂

Products used:

Stamp Sets: Haute Wedding Dress (The Ton), Perfectly Penned (Concord & 9th) and Confetti Bold Prints Background (Hero Arts)

Ink: Memento Tuxedo Black and Pen and Ballerina Pink (Lawn Fawn)

Specialty Ink: Versa-Mark

Embossing Powder: White Satin Pearl (Hero Arts)

Markers: Copics

Card Stock: Solar White 110lb and 80lb (Neenah)

Patterned Paper: Watercolor Wishes Petite Paper Pad (Lawn Fawn)

Dies: Stitched Ovals Stackables Lawn Cuts (Lawn Fawn)

Embellishments: Sweet Pea Mix (Pretty Pink Posh) and Wink of Stella Clear Glitter Brush Pen (Zig)

Adhesives: E-Z Runner Ultra Strong and 3D Foam Squares (Scrapbook Adhesives) and Multi-Matte Medium (Ranger)

Tools: Big Shot, Heat Tool (Hero Arts) and Mini Ink Blending Tool (Ranger)

The links below take you to the Stamp, Ink, Paper Store where you can purchase the items used on today’s project!


Posted on

Where Creativity Meets Concord & 9th – Case a Designer!

Hello again! I’m back for my second post for today! We have a new challenge over on the Where Creativity Meets Concord & 9th Blog for the month of March! This time we ask you to CASE a Designer!

Just choose one of the Design Team’s cards as your inspiration and go from there! I love Lindsey’s simple Lovely Cards! You can see the original post HERE. I thought the way that she used the Hello Lovely stamp to create a subtle background was so clever! First I used the Concord & 9th Butterfly Beauty Photopolymer Stamp Set and the Coordinating Butterfly Card Dies to cut out the wings, overlay and body for the butterfly. I positioned the wings in the MISTI and stamped the outline in Black Licorice and the fill-in in Juice Box. To hold them together I adhered a piece of Black behind the wings, adhered the Vellum die cut wings on top and then the body. For my card base I used Neenah Solar White 110lb Card Stock. I placed the folded card into my MISTI and positioned the flower cluster from the Concord & 9th Hello Lovely Photopolymer Stamp Set where I wanted it, inked it up with some Lawn Fawn Ballet Slippers Ink and stamped. While the card was in the MISTI I also stamped the greeting from the Butterfly Beauty Set in Black Licorice in the lower right corner. The butterfly is adhered to the card with a 3D Foam Square. I stamped two more of the small butterflies in Ballet Slippers and added a few Pretty Pink Posh Sparkling Clear, Ballerina Pink and Orchid Sequins to finish the card. I love that butterfly and the subtle stamped background, thanks for the inspiration Lindsey! I hope that you enjoyed my card for the Where Creativity Meets Concord & 9th CASE a Designer Challenge! Stop by the BLOG and see what the rest of the Design Team has done to inspire you and we would love for you to share your card with us in the gallery! You have the whole month to play along! Thanks for stopping by again today! I hope that you enjoy the rest of your Thursday! 🙂

Products used:

Stamp Sets: Butterfly Beauty and Hello Lovely Photopolymer (Concord & 9th)

Ink: Black Licorice, Juice Box and Ballet Slippers (Lawn Fawn)

Card Stock: Solar White 110lb and 80lb (Neenah) and Black (My Colors)

Specialty: 48lb Vellum (The Paper Cut)

Dies: Butterfly Card (Concord & 9th)

Embellishments: Sparkling Clear, Ballerina Pink and Orchid Sequins (Pretty Pink Posh)

Adhesives: E-Z Runner Ultra Strong and 3D Foam Squares

Tools: Big Shot and MISTI

The links below take you to the Stamp, Ink, Paper Store where you can purchase the items used on today’s project!


Posted on

OSAT March Blog Hop – Birthday Bash!

Hey hey! Happy Thursday! I had a nice productive day at the Store after I had to stop at the bank again yesterday morning! My ATM card didn’t work, thanks citibank! I’ve definitely seen enough of them this week! LOL! Renee had her Kiwi Lane class and my Parent’s stopped by in the morning for a bit. After work I came home and spoke to Heather for a bit. My friend Jim came by and we had dinner, Zorn’s which I haven’t had in forever, and listened to music and talked. A very nice way to end the day indeed!

For my projects today I’m participating in a blog hop with a bunch of my friends from one of the Facebook groups that I belong to. It’s called One Stamp at a Time Cards and More. If you have arrived here from the talented Megan Thompson, welcome! This month we have a Birthday Bash theme! I don’t know about you but I can always use a Birthday card! I made a card and a coordinating gift box to share with you today!

First up is my card! I used the Lawn Fawn Out of This World Photopolymer Stamp Set and stamped some of the images from the set in Lawn Fawn Jet Black Ink so that I could color them in with my Copics. They are cut out with the Coordinating Lawn Cuts. My card base is Neenah Solar White 110lb Card Stock. For the background I cut a piece of Black to be slightly smaller than my card front and heat embossed the greeting in the bottom left with Hero Arts White Embossing Powder. The background is then adhered to the card with Fun Foam and E-Z Runner. I added the images to the card with 3D Foam Squares and then stamped one of the stars from the set in Yeti Ink randomly over the background. Finally I used my Signo White Gel Pen to add dots to the background and give it a little more of a space feel. I think this would make a great card for a little boy’s Birthday, don’t you?

Next I have the coordinating box. I used the Lawn Fawn Fancy Box Lawn Cut to cut out the box and then used the Lawn Fawn Starry Skies Lawn Cut to cut out the stars from the lid. Some more images from the Out of This World Set are stamped, colored and cut out. I adhered the box together and added the stamped images to the lid with 3D Foam Squares. Again, I stamped the stars and added some dots and it’s done! I love that box, it’s a nice different way to give a gift card or a little present!

I hope that you enjoyed my card and gift box  for the OSAT Birthday Bash Blog Hop! You can click on the next button below to go back to the start and see what the talented Lori Mueller has come up with!! Thank you so much for stopping by to see me today. Have a thoroughly awesome Thursday! 🙂

Products used:

Stamp Set: Out of This World Photopolymer (Lawn Fawn)

Ink: Jet Black and Yeti (Lawn Fawn)

Specialty Ink: Versa-Mark

Embossing Powder: White (Hero Arts)

Markers: Copics

Card Stock: Solar White 110lb and 80lb (Neenah) and Black (My Colors)

Dies: Out of This World, Fancy Box and Starry Skies Lawn Cuts (Lawn Fawn)

Embellishments: Signo White Gel Pen (Uniball)

Adhesives: E-Z Runner Ultra Strong and 3D Foam Squares (Scrapbook Adhesives) and Scor-Tape

Tools: Big Shot, Heat Tool (Hero Arts) and Fun Foam

The links below take you to the Stamp, Ink, Paper Store where you can purchase the items used on today’s project!


Posted on

Paper Craft Crew 234

Halfway though, almost there! I had an interesting day yesterday. My checking account got screwed up by citibank, they cashed someone else check in my account and were very unhelpful, in fact it may be the worst customer service experience I have ever had! But with a little help from Heather we got it straightened out. Glad that we had to do all of the work to figure out what went wrong. Thanks citibank, I’ll definitely recommend you to my friends… NOT! So that ended up consuming most of my day. I did manage to get a few cards made while I was at the Store. When I got home I had dinner and then went out for a while with Taylor. To end the evening I watched a movie and soaked my feet. Today will be a much better day!! 😀

Since it’s Wednesday that means we have a new Paper Craft Crew sketch challenge…

I actually managed to keep my card nice and simple! The base is Neenah Solar White 110lb Card Stock. I used the Lawn Fawn Starry Skies Lawn Cuts to cut out the starts from a piece of Black. My piece of paper across the top as well as the two flagged pieces are from the Lawn Fawn Watercolor Wishes Petite Paper Pad. I adhered the purple and light blue, tied a piece of Hemptique Black Hemp Cord in a blow and then adhered the other blue piece over that with 3D Foam Squares. After it was all together I adhered the piece to the card base. Next I heat embossed the one of the banners from the Lawn Fawn Bannertastic Photopolymer Stamp Set in Hero Arts White Embossing Powder onto a piece of Black and then added the greeting from the Lawn Fawn Out of This World Photopolymer Stamp Set, slightly bending the stamp to follow the curve of the banner. A little E-Z Runner holds that in place. I also stamped the rocket from the Out of This World Set in Memento Tuxedo Black and colored it in with my Copics. The Coordinating Dies are used to cut it out and a 3D Foam Squares holds it in place. A few Pretty Pink Posh Sea Breeze and Onyx Sequins and the card is done! I love the simplicity of the card and the colors! I hope that you like my Design Team card for this week’s Paper Craft Crew Sketch Challenge! Stop by the BLOG and see the rest of the Team’s cards and enter yours in the gallery! Thank you for coming by to see what I’ve been up to! Have a wonderful Wednesday! 🙂

Products used:

Stamp Sets: Out of This World and Bannertastic Photopolymer (Lawn Fawn)

Specialty Ink: Versa-Mark

Embossing Powder: White (Hero Arts)

Markers: Copics

Card Stock: Solar White 110lb (Neenah) and Black (My Colors)

Patterned Paper: Watercolor Wishes Petite Paper Pad (Lawn Fawn)

Dies: Out of This World, Bannertastic and Starry Skies Lawn Cuts (Lawn Fawn)

Embellishments: Sea Breeze and Onyx Sequins (Pretty Pink Posh) and Black Hemp Cord (Hemptique)

Adhesives: E-Z Runner Ultra Strong and 3D Foam Squares (Scrapbook Adhesives) and Multi-Matte Medium (Ranger)

Tools: Big Shot and Heat Tool (Hero Arts)

The links below take you to the Stamp, Ink, Paper Store where you can purchase the items used on today’s project!


Posted on

SIP Challenge 89 – A Sketch!

Yup, still cold here! I did have a very fun day in Manhattan yesterday! Ella and I had a nice visit and took a little trip to the Apple Store to get her iPhone fixed. From there I headed down to The Ink Pad to see my friend Anna! We got caught up and I had some Dirty Bird for lunch, delicious. I took the 3:01 train back out to the Island and got to spend some time with my Brother, Erika, Daniel and Tristan. We had cake for my Dad’s birthday which was on the 1st. I stopped home quick and then went over to Heather’s so that we could take a drive to see our friends Patti and Tom and the kids. We had a nice time and quick ride home. Today I’m back at the Store with lots of things to catch up on! 😀

It’s time now for this week’s Stamp, Ink, Paper Challenge…

I do love a new release from Lawn Fawn and I haven’t really played with the Bicycle Built for You Set yet so that’s what I used on today’s card! The base is Neenah Solar White 110lb Card Stock. I adhered a strip of Lawn Fawn Rudolph 12×12 Paper and a thin strip of Black Licorice down the left side. To create my little scene I cut out a piece of Mermaid with the Lawn Fawn Zig Zag Circles Stackables, I also used the Lawn Fawn Grassy Hillside Borders to cut out a piece of Noble Fir and the Lawn Fawn Road Border to cut out a piece of Black Licorice and Solar White 80lb. The Zig Zag Circles are used again to cut the edges off of them and they are lined them with the Mermaid Circle to adhere them all together. I used a some Fun Foam and E-Z Runner to adhere the circle to the card. My images and greeting are from the Lawn Fawn Bicycle Built for You Photopolymer Stamp Set and are stamped in Memento Tuxedo Black. I colored them in with Copics and cut them out with the Coordinating Dies. They are adhered to the card with 3D Foam Squares. All that was left to do was to stamp the greeting in the lower right! I do like the set and all of the little pieces that you can change up! I hope that you enjoyed my Design Team card for this week’s Stamp, Ink, Paper Challenge! Head on over to the BLOG and check out the rest of the Team’s cards including this month’s Guest Designer Sue Plote! We hope that you will share your take on the sketch by adding it to the gallery! Thanks so much for stopping by! Have a terrific Tuesday! 🙂

Products used:

Stamp Set: Bicycle Built For You Photopolymer (Lawn Fawn)

Ink: Memento Tuxedo Black

Markers: Copics

Card Stock: Solar White 110lb and 80lb (Neenah), Black Licorice, Noble Fir and Mermaid (Lawn Fawn)

Patterned Paper: Rudolph 12×12 (Lawn Fawn)

Dies: Bicycle Built For You, Grassy Hillside Borders, Road Border and Zig Zag Circles Stackables Lawn Cuts (Lawn Fawn)

Adhesives: E-Z Runner Ultra Strong and 3D Foam Squares (Scrapbook Adhesives)

Tools: Big Shot and Fun Foam

The links below take you to the Stamp, Ink, Paper Store where you can purchase the items used on today’s project!


Posted on

Mojo Monday 487

What a Sunday that was! When I got to the Store in the morning there was water all over, apparently there was an issue with a pipe somewhere in the building and it caused a leak. Renee, Angie and I must have used the Shop-Vac 20 times to vacuum up the water, they finally got it fixed around 3:00. Needless to say I didn’t get much done! My friends Lori and Debbie did stop by the store to pick up some goodies and I was also very happy that Jodi Collins from the My Favorite Things Design Team came in! So nice to get to meet her and chat with her about crafty stuff! You can see her blog HERE! After work I had dinner with my Parents and then watched some TV and read for a little bit. Today I’m off to Manhattan to see my friend Ella and maybe take a little trip down to The Ink Pad! Should be a fun day! 🙂

It’s Monday and you know what that means… time for a new Mojo Monday sketch…

For some reason lately I have been into some really bright colors! My card starts off with a base of Neenah Solar White 110lb Card Stock with a piece of Pale Aqua for the background. All of my images are from the Lawn Fawn How You Bean? Photopolymer Stamp Set. I stamped the jellybean outline repeatedly onto a piece of Crisp Green with Lawn Fawn Freshly Cut Grass Ink to use for my strip down the middle. Next I used the Hero Arts Infinity Circles and Lawn Fawn Zig Zag Circles Stackables Lawn Cuts to cut out a piece of Purple Hearts and Lawn Fawn Gummy Bears 12×12 Paper. I adhered them to a piece of Solar White 80lb and then to the card. The jar is stamped in Lawn Fawn Minty Fresh. I used the Coordinating Lawn Cuts to cut out the stamped jar, a piece of Acetate and another piece of Solar White 80lb. I then cut out the negative of the jellybeans from the stamped jar, lined it up with the blank one and stamped the jellybeans in Memento Tuxedo Black. They are colored in with my Copics. I adhered the acetate to the back of the stamped jar and then used 3D Foam Squares to adhere it to the colored image. For the lid I heat embossed the image onto a piece of Galvanized Curios Metallic with Hero Arts Platinum Embossing Powder. It’s also cut out with the Coordinating Lawn Cuts and adhered to the jar that is then adhered to the card. For my greeting I used the Lawn Fawn Happy, Happy, Happy Photopolymer Stamp Set and stamped the happy in Merman, used the Coordinating Lawn Cuts to cut it out, stamped the birthday also in Merman onto a strip of White and flagged the right side. The happy is adhered with more 3D Foam Squares and the birthday is tucked under the circle. I added a few Pretty Pink Posh Sparkling Clear, Raspberry, Amethyst, Pewter and Lemon Drop Sequins for a little sparkle! The jar looks much better in person, with the Acetate it really does look like glass! I hope that you enjoyed my Design Team card for this week’s Mojo Monday Sketch Challenge! Stop by the BLOG and check out the rest of the Team’s cards and enter yours in the gallery! Thank you for starting your week off here! Have a marvelous Monday! 🙂

Products used:

Stamp Sets: Hou You Bean? and Happy, Happy, Happy Photopolymer (Lawn Fawn)

Ink: Minty Fresh, Merman and Freshly Cut Grass (Lawn Fawn) and Memento Tuxedo Black

Specialty Ink: Versa-Mark

Embossing Powder: Platinum (Hero Arts)

Card Stock: Solar White 110lb and 80lb (Neenah), Purple Hearts, Crisp Green and Pale Aqua (My Colors)

Specialty: Acetate and Galvanized Curious Metallic (The Paper Cut)

Patterned Paper: Gummy Bears Perfectly Plaid 12×12 (Lawn Fawn)

Dies: How You Bean?, Happy, Happy, Happy and Zig Zag Circles Stackables Lawn Cuts (Lawn Fawn) and Infinity Circles (Hero Arts)

Embellishments: Sparkling Clear, Raspberry, Amethyst, Pewter and Lemon Drop Sequins (Pretty Pink Posh)

Adhesives: E-Z Runner Ultra Strong and 3D Foam Squares (Scrapbook Adhesives)

Tools: Big Shot and Heat Tool

The links below take you to the Stamp, Ink, Paper Store where you can purchase the items used on today’s project!


Posted on

Better with You… and Coffee

OMG! It feels like Winter is back! I don’t think that it got out of the teens yesterday and that wind was as strong as ever! Hey Spring, where’d ya go?! I did have a nice productive day at the Store, managed to get two cards made and survived Renee’s kids class! LOL! After work I had a quick dinner with my Parents, they were going to my Brother’s to watch Daniel and Tristan. Taylor came by and we ran a few errands. I cleaned the bathroom, Saturday night fun, and watched Sweet Home Alabama! I never realized but Reese Whitherspoon drives the same car that I have in the movie! Sunday’s are usually quiet at the Store so I’m going to try and get all caught up on my projects! 😀

Today I have my solo post for the Where Creativity Meets Concord & 9th blog and I’m sharing another card for the Love Theme Challenge that just finished! You can see my post by clicking HERE and heading over to the Design Team Blog! The post will go live at 11:00AM.

I started by heat embossing the images for the coffee cup and plate onto a piece of Kraft Card Stock with some White Embossing Powder. I do enjoy a little fussy cutting and these images are super easy to cut out. My greeting is from the Concord & 9th By Your Side Photopolymer Stamp Set and is stamped in Onyx Black onto the plate. The card base is Neenah Solar White 110lb Card Stock with a piece of black and cream patterned paper for the background. I decided that it was a little too bold so I used a piece of Vellum to soften it adhering the images with Foam Tape, including a spoon that I heart embossed onto a piece of gold metallic card, to it and the hiding the adhesive behind them to hold the vellum to the card. A relatively simple card to make that will get sent to someone special just to let them know I’m thinking of them!

I hope that you enjoyed today’s card! We will be starting a new challenge on March 9th so be sure and play along with us for that one! Thanks for stopping by and spending some of your Sunday with me! Have a simply wonderful day! 🙂

 

Products used:

Stamp Sets: Let’s Chat and By Your Side Photopolymer (Concord & 9th)

Ink: Onyx Black (Versa-Fine)

Specialty Ink: Versa-Mark

Embossing Powder: White (Hero Arts)

Card Stock: Solar White 110lb (Neenah) and Kraft (My Colors)

Specialty: 49lb Vellum and White Gold Curious Metallic (The Paper Cut)

Patterned Paper: Fabulous 12×12 (Authentique)

Adhesives: E-Z Runner Ultra Strong and 3D Foam Squares (Scrapbook Adhesives)

Tools: Heat Tool (Hero Arts) and Fun Foam

The links below take you to the Stamp, Ink, Paper Store where you can purchase the items used on today’s project!


Posted on

Freshly Made Sketches 277

It’s going to be a chilly weekend here, Winter is back! 🙁 I had a nice surprise at the Store yesterday morning, my friend Brian came by for a visit. He needed a custom stamp made and I haven’t seen him in ages! My friend Sue also stopped by which was really nice! After work I had dinner with my Parents and then watched a movie. Renee has a kids class at the Store today and I have many projects to get finished! 😀

Time now for my card for this week’s Freshly Made Sketches…

I went with nice and simple just like the sketch! My card base is Neenah Solar White 110lb Card Stock. For the background I used a little piece of paper that Renee had left over, it’s from the Illustrated Faith line. I die cut the love from the Hero Arts Love Stamp & Cut from a piece of Chinese Red and two pieces of Solar White 110lb. They are adhered to each other with Multi-Purpose Spray Adhesive and then to a strip of Ballerina Pink with Multi-Matte Medium with the rest of the greeting stamped in Crimson Hybrid Ink. The strip is adhered to the card with 3D Foam Square and a few Pretty Pink Posh Pink Peonies, Raspberry and Sparkling Clear Sequins are added to finish it! I do like the little brush stroke hearts on that Patterned Paper, fun and subtle! I hope that you enjoyed my card for this week’s Freshly Made Sketches Challenge! Thanks for stopping by! Have a stellar Saturday! 🙂

Products used:

Stamp Set: Love Stamp & Cut Photopolymer (Hero Arts)

Ink: Crimson Hybrid (Hero Arts)

Card Stock: Solar White 110lb (Neenah), Chinese Red and Ballerina Pink (My Colors)

Patterned Paper: Illustrated Faith Heart A Flutter

Dies: Love Stamp & Cut (Hero Arts)

Embellishments: Pink Peonies, Raspberry and Sparkling Clear Sequins (Pretty Pink Posh)

Adhesives: E-Z Runner Ultra Strong and 3D Foam Squares (Scrapbook Adhesives), Multi-Purpose Spray (Elmer’s) and Multi-Matte Medium (Ranger)

Tools: Big Shot

The links below take you to the Stamp, Ink, Paper Store where you can purchase the items used on today’s project!